Skip to content 
EN
SV
CONSORB DC-50R
THE DC-50 HAS A SIMILAR HOUSING TO THE DR-50 BUT RUNS WITH TWO FANS
The DC-50 has a resistive heater and needs a three phase supply. This unit is the right choice when you need to recirculate air in a room and there is a large difference between moisture content of the air in a room and the air outside. As an option it is possible to control the capacity with a 0-10Vdc signal, for example from regulator EH3.
Capacity
Capacity: 3.0kg/h* / Dry air flow: 550m3/h
*Dehumidifying capacity at 20°C / 60%RH
Sorption Technology
Consorb
The Consorb principle is normally used at low regeneration temperatures, e.g. if you have surplus heat or when dehumidifying very damp air. The Consorb principle is also good when there is a large difference in moisture content between process and regeneration air inlets.
