Will never over-heat so no annoying over- heat thermostat tripping. Quick check that all is OK on the ampere- meter.
Check that you have correct wet airflow by checking amperemeter.
PTC stones with increasing resistance with temperature. Will never exceed 230°C.
Electric heater
Stainless steel heater tubes.
Always double safety, over-heat thermostat activates both contactor and fuse.
Basic is 2-step but recommended to go for EnergySaving 2 – full linear control.
Add PLC C4 or a panel mounted EH3 to have linear regulator together with EnergySaving 2. EH4 will give a more basic 2-step control.
Steam heater
Copper tubes with aluminium fins.
Gives nominal value at 6 bar(g), max working pressure 10 bar(g), max temperature 185°C.
Basic is without any valves or control. EnergySaving3 is linear control from around 20% to 100% capacity with control of wet airflow and indirectly steam flow. EnergySaving 2 is with a controlling steam valve (free issued).
Add PLC C4 or a panel mounted EH3 to have linear regulator together with EnergySaving 2/3. EH4 will give a more basic on/off control.
Gas heater
Direct fired gas heater
Basic 2-step or EnergySaving Step 2 linear.
Gas train included with all safety devices.
Add PLC C4 or a panel mounted EH3 to have linear regulator together with EnergySaving 2. EH4 will give a more basic 2-step control.
Hot Water heater
Use hot water from heat pumps or district heating for a greener operation of the dehumidifier. Good capacity with as low as 60°C water.
Tell us the water temperature you have and we will check if capacity is enough with only water or if needed we can add another heater after the hot water heater for some of the dehumidifiers like CZ and Flexisorb.
Copper tubes with aluminium fins is our standard hot water coil.
Basic is without any valves or control. EnergySaving 2 is with a controlling water valve (free issued).
Add PLC C4 or a panel mounted EH3 to have linear regulator together with EnergySaving 2. EH4 will give a more basic 2-step control.